点击图片查看大图
抗氧焊锡棒Ａ.U.Solder Bar
嘉田之除氧焊锡棒是以特殊方式处理,将一般焊锡之氧化物(即锡渣)除去.当焊锡熔融时,氧化物之发生量较一般焊锡减少了将近一半,且焊锡表面能保持较久时间,对于作业上之改善及产品品质之改良均有良好成效.
Our solder is specially treated to remove oxides,the tesult is a much lower level(around 50%) of oxides during melting,making the solder easier to handle and reducing waste,Even without the addition of anti-oxidation elements,our solder resists oxidation and will retain a clean surface much longer then common solder,jia tian solder meets the standard CNS,JIS,and ASTM specifications.
| ◆特性 Features ·熔解后氧化物(锡渣)之发生量较一般 焊锡减低近半. ·锡炉表面光泽如镜,且液相体较佳,焊 接性能更好,减低浪费. ·本产品已具有防止氧化作用,若锡炉内 再微量添加抗氧油脂,则氧化殆无. |
·Oxide occuring after melting approximately 50% less than common solder.
·Solder has highly reflective surface and low viscosity,for improved
soldering and reduced waste.
·Naturally anti-oxidizing;with the addition of small amounts of anti-
oxidizing agents,oxidation can be reduced to almost nil.
·Conforms to CNS,JIS,and ASTM standards.
○抗氧化焊锡棒化学成分之二例○
Chemical composition of A.U.Bai Solder
| 成份 composition | Sn | Pb | 不纯物 lmpurities% | ||||||
| Sb | Cu | Bi | Zn | Fe | Al | As | |||
| Lat1 | 59.98 | 余量 remainder | 0.03 | 0.003 | 0.02 | 0.001 | 0.002 | 0.0006 | 0.008 |
| Lat2 | 63.01 | 余量 remainder | 0.03 | 0.002 | 0.02 | 0.001 | 0.0015 | 0.006 | 0.007 |
| 品牌 | 加田 | 型号 | 63 |
| 类型 | 多款供选 |
